MaxxMill© is an agitated media mill for dry and wet fine grinding developed based on the unique mixing principles of Eirich Intensive Mixer.
Efficient agitation of the grinding media allows for “metal-contamination-less” specifications in the fine grinding of ceramics, glass materials, and other materials.
Major processes
- Flexible material selection to match the product
- Easy cleaning and maintenance
- Small space requirement, low noise and vibration
- Low specific energy consumption
- Applicable to dry and wet fine grinding
Materials are fed through a hollow flow deflector into the bottom of the rotating grinding chamber, where materials are ground by grinding media (3-10 mm) that is vigorously agitated by the eccentric agitator. The ground particles are collected from the product outlet.
- Silica
- Feldspar
- Glaze
- Porcelain raw materials
- Glass raw materials
- Aluminum oxide
- Ferrite filler
- Pigments
- Bentonite
- Ores
- Gypsum
- Special cement
- Calcium carbonate etc.
MaxxMill©
| MaxxMill® MM3 | MaxxMill® MM5 | ||
|---|---|---|---|
| Processing Volume | (ton/hr) | ～2.5 | ～10 |
| Grinding Vessel Capacity | (liter) | 190 | 800 |
| Power | (kW) | 25～50 | 120～200 |
| Grinding Media Diameter | (mm) | 3～10 | |
| Grinding Material | (mm) | 2mm or less | |
| Product | （D97） | Approx. 5μm | |
| Approximate Size | H/W/D | 260 x900 x1700 | 3500 x2000 x3100 |
| Approximate Weight | (ton) Quantity | 3.5 | 11.5 |
* The above processing volume and product particle size are for reference only. It will vary depending on the material to be ground and the required particle size.
** Specifications are subject to change depending on the type of material and grinding conditions.
Industrial Chemicals
Building Materials
Environmental Protection
Ceramics
Glass
Chemical Products
Paints/Inks/Coatings
Steel/Nonferrous Metals
(pdf, 866 KB)
MaxxMill©